Clear All Heart Redwood delivers premium redwood boards with minimal sapwood and consistent grain. This article breaks down the price, includes the typical total cost, per-unit pricing, and regional nuances so buyers can budget accurately. The cost drivers include grade, thickness, length, board feet, and preparation needs such as milling or surfacing.

Introduction note: Prices shown reflect standard thickness options (1–2 inches) and common lengths (8–16 feet) in the continental U.S., with Midwest and West Coast differences accounted for in ranges.

Item	Low	Average	High	Notes
Clear All Heart Redwood Board Feet	$3.50	$5.50	$7.50	Per bd ft, rough-cut
Finished Lumber (planed, edged)	$6.50	$9.00	$12.50	Plain or edge-glued options
2×6 Premium Board (8 ft)	$32	$46	$70	Standard size; no milling
Delivery to job site	$75	$150	$350	Depends on distance and access
Drying and Kiln Seasoning	$0.30	$0.70	$1.20	Per bd ft if required

Price Range for Clear All Heart Redwood by Grade and Size

Prices vary by grade selection and dimensions. Typical total price for a small project (100–200 bd ft) falls in the $600–$1,000 range before milling or delivery, while larger runs (500–1,000 bd ft) commonly land between $2,750 and $6,000. Per-unit costs commonly appear as $3.50–$7.50 per board foot for rough-cut stock and $6.50–$12.50 per board foot for finished stock. Assumptions: standard 1–2 inch thickness, no unusual species defects, standard regional freight.

Key Cost Components in a Redwood Quote

Understanding the quote structure helps compare offers. The four primary cost components are Materials, Labor, Delivery/Logistics, and Finishing. Assumptions: typical U.S. labor rates, standard milling options, and no rush delivery.

Component	Low	Average	High	Notes
Materials	$3.50/bd ft	$5.50/bd ft	$7.50/bd ft	Clear All Heart Redwood, rough-cut
Labor	$1.50–$2.50/bd ft	$2.50–$4.00/bd ft	$5.00/bd ft	Cutting, planing, grading
Delivery/Disposal	$75–$125	$125–$225	$300–$350	Distance-based
Finishing/Surfacing	$0.50–$1.50/bd ft	$1.00–$2.50/bd ft	$3.00/bd ft	Planing, sanding, inspection
Waste/Offcuts	$0.25–$0.75/bd ft	$0.50–$1.25/bd ft	$2.00/bd ft	Scrap control
Warranty/Assurance	$0.00	$0.50/bd ft	$1.00/bd ft	Coverage period varies

Variables That Strongly Alter the Final Price

Several technical and site factors shift the quote. Significant drivers include board length and density, milling requirements, and regional freight. A longer run (12–16 ft boards) usually adds 20–40% to material cost, while heavy milling or specialty finishes can add 25–60% to the labor and finishing line. Assumptions: standard grading, no exotic grain patterns, average kiln-dried stock.

Regional Variations in Redwood Lumber Pricing

Coast regions often incur higher freight and demand-driven pricing, while inland markets may show modest discounts. For a fixed quantity (300–500 bd ft), West Coast delivery can add $100–$180 versus the Midwest, and the Southeast may fall in between. Assumptions: typical contractor material margins, standard seasonal demand.

How Quantity Impacts Average Cost Per Board Foot

Large buys reduce per-foot costs through economies of scale. A 100–200 bd ft order might average $5.50–$7.50 per bd ft (materials only), while 1,000 bd ft often drops to $4.50–$6.00 per bd ft, with delivery becoming the dominant variable at scale. Assumptions: consistent grade, standard milling, steady regional pricing.

Labor Intensity and Time Implications for Price

Labor charges depend on surface finish and milling depth. Rough-cut stock requires less time than surfaced, ready-to-install boards. A typical contractor rate ranges from $2.50 to $4.00 per bd ft for milling and grading, plus a project management surcharge if the job spans multiple days. Assumptions: single-team crew, standard tools, no rush.

Impact of Finishing Options on Total Cost

Finishing adds measurable expense. Sanding, sealing, and applying a protective coat can add $1.00–$2.50 per bd ft. For premium water-repellent finishes or UV sealants, expect $2.50–$4.00 per bd ft. Assumptions: water-based sealants, typical interior or exterior exposure.

Delivery Logistics and Access Considerations

Site access controls price. Elevations, long driveways, or gated access can increase delivery fees by $50–$250. For curbside vs. full-on site unloads, expect a $25–$75 swing per delivery window. Assumptions: standard palletized load, forklift-ready site.

Cost-Saving Moves Without Compromising Quality

Strategy choices can lower the bottom line. Reducing overall scope by selecting rough-cut stock, aligning lengths to fewer joins, and batching purchases with a single supplier can save 10–20% on materials and 5–15% on delivery. Consider delaying nonessential finishes or substituting fewer premium boards for critical spots. Assumptions: project tolerances permit standard jointing and fewer finish coats.

Sample Real-World Quote Scenarios

1. Project A: 250 bd ft rough-cut Clear All Heart Redwood, Midwest delivery, no milling, curbside. Materials $1,125; Labor $750; Delivery $120; Total $2,000.

2. Project B: 600 bd ft surfaced 1×8 boards, West Coast delivery, planing and light sanding, standard sealant. Materials $3,300; Labor $1,900; Delivery $180; Finishing $650; Total $6,030.

3. Project C: 1,000 bd ft mixed-length stock, southern region, full milling and exterior sealant, site unload. Materials $5,000; Labor $3,200; Delivery $300; Finishing $900; Total $9,400.

Per-Unit Details for Clear All Heart Redwood

Board-foot pricing helps compare quotes precisely. Rough-cut stock often lands in the $3.50–$7.50 per bd ft band; surfaced stock runs $6.50–$12.50 per bd ft depending on finish and length. A common bundle of 8 ft 2×6 boards might be $32–$70 per piece, depending on milling and regional pricing. Assumptions: standard 1–2 inch thickness, typical averages by region.

Practical Ways to Trim Price on Redwood Projects

Control scope, plan ahead, and compare multiple bids. Use consistent board lengths, avoid specialty milling, and request quotes that separate materials, labor, and delivery. Scheduling during off-peak seasons can also shave 5–12% off all-in costs. Assumptions: normal calendar, no emergency timelines.

Short Glossary of Terms for Price Clarity

bd ft: board feet; planed: surfaced to smooth finish; kiln-dried: moisture controlled; curbside: delivery at street, not hauled inside; finish: coating or sealant applied after milling.