Prices for cherry wood kitchen cabinets vary by door style, plywood or solid wood cores, and installation scope. This guide breaks down typical costs, per-unit pricing, and regional differences to help plan a budget for cherry wood cabinetry.
Assumptions: standard 10×12 kitchen, mid-range cherry wood, mid-level hardware, standard installation with existing layout.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinetry (all cabinets, base and wall) | $6,000 | $12,000 | $22,000 | Includes doors, frames, and interiors |
| Finish/stain and hardware | $1,000 | $2,500 | $5,000 | Includes pulls/handles |
| Delivery | $200 | $650 | $1,200 | Depends on distance and access |
| Installation/Labor | $2,500 | $5,500 | $12,000 | Includes adjustments and inset work |
| Removal/Project prep | $300 | $1,000 | $2,000 | Old cabinet removal and clean-up |
Note: totals assume standard 10×12 kitchen with 20–24 linear feet of cabinetry and mid-range hardware.
Cherry Wood Cabinet Price Range by Cabinet Set Size
Prices are shown as per-unit ranges when applicable and reflect common mid-range quality. Typical total price covers base and wall cabinets for a standard kitchen with upper and lower rows.
- Small kitchen (≤10 linear ft): $3,000–$8,000 for cabinets; hardware and finish add $800–$2,000.
- Mid-sized kitchen (10–20 linear ft): $8,000–$16,000 cabinets; $1,500–$3,500 for hardware and finish.
- Large kitchen (20–25+ linear ft): $14,000–$28,000 cabinets; $2,500–$5,000 for hardware and finish.
Assumptions: solid wood cores, standard 3/4″ thickness, 5-piece doors, mid-range stain.
Major Cost Components in a Cherry Cabinet Quote
Understanding the parts helps compare bids. The table shows common cost drivers and unit expectations. Materials and labor dominate the quote for cherry wood cabinetry projects.
| Cost Component | Typical Range | Per-Unit Basis | Notes |
|---|---|---|---|
| Materials (cabinet boxes, doors, face frames) | $5,000–$14,000 | per cabinet or per linear ft | Solid cherry vs stained plywood cores |
| Labor (fabrication, assembly, installation) | $2,500–$12,000 | per hour or per cabinet | Includes site preparation |
| Finish and hardware | $1,000–$5,000 | per set | Stain, sealant, pulls |
| Delivery/Handling | $200–$1,200 | per project | Distance dependent |
| Removal of old cabinets | $300–$2,000 | per project | Includes disposal |
Assumptions: standard mid-range finish; region with average labor rates; no custom carvings.
Variables That Most Impact the Final Cherry Price
Two key drivers reliably shift bids beyond base estimates. Door style complexity and panel material quality each push price by noticeable margins.
- Door style: flat panel vs raised panel can add 15%–40% to materials and finish costs.
- Core construction: solid cherry boxes vs plywood cores with cherry veneer affects both price and weight.
Assumptions: standard cabinet count, typical hinge hardware, no-custom engraving.
Strategies to Lower the Cherry Cabinet Price Without Sacrificing Quality
Smart scope decisions reduce costs while preserving appearance and durability. Opting for standard sizes and fewer custom runs typically lowers the total.
- Choose standard 32″ or 36″ base heights and 24″ deep bases if possible.
- Consider a semi-gloss finish and fewer decorative carvings to reduce finish labor.
- Decide between solid cherry doors or cherry veneer with a solid wood frame to save material costs.
- Bundle cabinet plus countertop procurement with the same contractor when feasible.
Assumptions: standard installation path, no island with complex wiring or plumbing changes.
Per-Unit Pricing: Cabinets, Frames, and Doors
Prices are often shown per cabinet or per linear foot. Solid wood box units cost more than framed plywood boxes; double-check interior shelving and soft-close hardware.
| Item | Low | Average | High | Units | Notes |
|---|---|---|---|---|---|
| Base cabinet (24″ wide) | $350 | $600 | $1,000 | per cabinet | Solid cherry vs veneer |
| Wall cabinet (30″ wide) | $350 | $650 | $1,100 | per cabinet | With doors and shelves |
| Door panel (raised) | $60 | $110 | $180 | per door | Cherry wood |
| Finish/stain per cabinet | $40 | $90 | $180 | per cabinet |
Assumptions: standard hinge hardware, standard interior shelving, no glass doors unless specified.
Regional Price Differences Across U.S. Markets
Regional labor rates and material costs cause noticeable deltas. Coastal metro areas often run higher than midwest suburban markets.
- Northeast metros: cabinet costs +15%–25% relative to national average.
- Midwest: near national average with possible 5%–10% savings on labor.
- South and Southwest: regional supply chains may reduce delivery fees by 5%–15% in some markets.
Assumptions: typical mid-grade cherry, no premium exotic woods, standard lead times.
Delivery, Removal, and Installation Timeframe Impacts
Delivery logistics and project duration affect total price through scheduling and overtime. Longer lead times or rush orders add predictable surcharges.
- Delivery window: regular service within 1–2 weeks vs rushed delivery within 3–5 days.
- Installation crew size: 2–3 installers for most kitchens; larger or complex layouts may require 4–5.
- Prep work: if walls or floors require leveling, expect added labor hours and materials.
Assumptions: standard single-story kitchen, no structural changes.
Example Quote Scenarios to Help Budget
Concrete, real-world examples show how quantities translate to totals. Scenario A features a mid-sized kitchen with standard cherry doors; Scenario B uses a higher-end solid-core build for a premium look.
- Scenario A: 14 base cabinets, 8 wall cabinets, standard hardware, mid-range stain. Cabinets $8,500; Finish $2,000; Labor $5,500; Delivery $500; Removal $600. Total $17,100.
- Scenario B: 20 base, 12 wall, solid cherry boxes, raised panel doors, premium hardware. Cabinets $14,000; Finish $4,000; Labor $8,000; Delivery $800; Removal $1,200. Total $28,000.
Assumptions: regional labor rates align with national mid-range, no island or custom electrical work.
