Cric Cedar lining boards price typically ranges from a low cost for standard 1×6 boards to higher figures for premium harvested cedar or tongue-and-groove panels. The main cost drivers include board width, thickness, grade, tongue-and-groove vs plank format, underlayment, and regional labor rates. This article provides practical price ranges in USD and per-unit terms to help budget for cedar lining projects.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cedar lining boards (1×6, cedar species, standard grade) | $1.80 | $3.20 | $5.50 | Per linear foot |
| Cedar lining boards (1×8, clear/heartwood) | $2.40 | $4.50 | $7.50 | Per linear foot |
| Tongue-and-groove cedar panels (3/4 in thick) | $3.80 | $6.50 | $9.50 | Per linear foot |
| Labor for installation (professional) | $1.50 | $3.00 | $5.00 | Per linear foot installed |
| Delivery within 50 miles | $40 | $100 | $180 | Flat fee or fee by order size |
What Cedar Lining Boards Typically Cost For A Standard Room
Typical total price for lining a standard 12×12 room with 1×6 cedar boards ranges from $1,000 to $2,600, depending on board grade, finish, and labor rates. For a higher-end finish using 1×8 clear cedar or tongue-and-groove panels, expect $2,000 to $4,600 total.
Assumptions: Midwest labor rates, standard surface prep, 8–10 ft ceilings, indoor climate-controlled installation.
Major Cost Elements In A Cedar Lining Project
The quote usually breaks into four to six line items. Materials and finish choices drive most of the price, followed by labor and delivery. The table shows common components and pricing ranges.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (boards, fasteners, sealant) | $1.50 | $3.50 | $6.50 | Per linear foot |
| Finish and sealant | $0.40 | $1.20 | $2.50 | Per sq ft finished |
| Labor for installation | $1.00 | $2.50 | $4.50 | Per linear foot |
| Trim and edging | $0.25 | $0.80 | $2.00 | Per linear ft |
| Delivery | $20 | $75 | $150 | Dependent on distance |
Assumptions: Standard 6–8 inch ceiling height, indoor installation, typical access, no premium rot resistant species beyond cedar.
Key Variables That Move The Cedar Price Higher Or Lower
Several factors push quotes up or down. Board width and grade are the largest drivers; wider boards and clearer, heartwood grades cost more. Regional labor costs and project scope also shift final totals significantly.
- Board grade: appearance-driven grades add cost; rough sawn vs smooth finished responses vary.
- Finish system: bare cedar vs pre-finished with clear topcoat affects material cost and labor time.
- Room size and ceiling height: larger areas require more boards and longer installation time.
- Access and prep work: difficult-to-reach walls, wall repairs, or moisture mitigation adds hours and materials.
Assumptions: Standard interior walls, no moisture remediation needed, single-story room.
Price differences by region can be meaningful. In coastal or urban markets, expect higher ranges due to labor and delivery costs. The per-foot Cedar price may be 10–25% higher in high-cost markets compared with inland rural regions.
| Region | Material Range (per ft) | Labor Range (per ft) | Total Range (per ft) | Notes |
|---|---|---|---|---|
| Northeast dense markets | $3.50–$7.50 | $2.00–$4.00 | $5.50–$11.50 | Delivery and markup higher |
| Midwest | $2.50–$5.50 | $1.80–$3.20 | $4.30–$8.70 | Balanced costs |
| South | $2.00–$5.00 | $1.60–$3.00 | $3.60–$8.00 | Generally lower labor |
| West Coast | $3.20–$6.80 | $2.20–$4.20 | $5.40–$11.00 | Higher shipping and demand |
Assumptions: 50-mile delivery radius; typical 8–10 ft ceilings; standard residential project.
Concrete examples help anchor budgeting. For a small bathroom with 8 ft walls using 1×6 pine cedar veneer, total might be around $800–$1,600. Upgrading to 1×8 clear cedar with tongue-and-groove for a living room accent wall could reach $2,000–$5,000 depending on size and finish.
Assumptions: Interior wall framing intact, standard access, no structural modification.
When reviewing quotes, compare per-foot material prices, per-sq-ft finishing, and installation hours. Bundling materials with delivery often saves between 5% and 12% compared with separate purchases.
Assumptions: Single supplier, standard delivery window, no rush service.
Extra items can inflate the budget. Moisture barriers, vapour retarders, and specialty fasteners add measurable cost, while minor trimming or repair tasks may be billed as separate line items.
- Moisture control products add $0.40–$1.20 per sq ft.
- Premium fasteners or anti-corrosion hardware add $0.15–$0.60 per linear ft.
- Site cleanup and debris removal add $50–$150 per job.
Assumptions: Indoor dry environment; standard screws and nails; no structural work.
This example uses tongue-and-groove cedar panels at 3/4 inch thickness. Materials: $1,800–$2,600. Labor: $900–$1,600. Delivery: $60–$120. Total: $2,760–$4,320.
Assumptions: 3/4 in thick tongue-and-groove panels, standard room, mid-range finish.
