Homeowners typically pay for a 6‑foot cedar privacy fence based on length, material grade, labor, and local permitting. The main cost drivers are picket spacing, gate count, and soil conditions. The following price ranges reflect typical U.S. installations with standard pressure-treated posts and cedar boards.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (cedar boards, posts, rails) | $6-$12 | $9-$16 | $15-$22 | Per linear foot; assumes complete privacy panels |
| Labor & Installation | $10-$18 | $14-$26 | $22-$38 | Per linear foot; includes setting posts |
| Hardware & Fasteners | $1-$3 | $2-$4 | $3-$6 | Stainless steel or coated options |
| Permits & Codes | $0-$200 | $50-$300 | $300-$600 | Varies by municipality |
| Delivery/Disposal | $0-$100 | $50-$150 | $150-$350 | Local haul or dump fees |
| Warranty/Extras | $0-$100 | $50-$200 | $200-$400 | Limited lifetime options add cost |
Overview Of Costs
Cost for a 6‑foot cedar privacy fence is typically quoted per linear foot. Assumptions: region, fence length, soil conditions, gate count, and finish. For 6‑ft cedar fencing, the per‑linear‑foot range is commonly about $22-$38 installed, with total project cost scaling by length. For example, a 50‑ft run may cost roughly $1,100-$1,900, while a 100‑ft run often falls in the $2,200-$3,800 range. Per‑unit pricing helps compare vendors and plan budgets across different yard layouts.
Cost Breakdown
| Component | Low | Average | High | Notes | Assumptions |
|---|---|---|---|---|---|
| Materials | $6-$12 | $9-$16 | $15-$22 | Board grade, spacing, and post type | Span: 50‑200 ft; Privacy panels |
| Labor | $10-$18 | $14-$26 | $22-$38 | installation time and crew size | Labor hours: 1.0–2.0 per ft |
| Permits | $0-$200 | $50-$300 | $300-$600 | Local requirements | Residential fence permits where required |
| Delivery | $0-$100 | $50-$150 | $150-$350 | Transport to site | Adjacent to supplier |
| Hardware | $1-$3 | $2-$4 | $3-$6 | Hinges, nails, fasteners | Stainless or coated |
| Finishes & Warranty | $0-$100 | $50-$200 | $200-$400 | Sealant or stain options | Limited lifetime options add cost |
What Drives Price
Labor, hours & rates are a major driver: longer fences require more crew time and travel. Assumptions: standard 6‑foot panels, treated posts, no complex features. Materials vary by cedar grade (clear vs. knotty), board width, and the number of gate openings. The post work cost depends on soil conditions and trench depth; hard soil or rocky ground increases time and expense. Local building codes and fence height restrictions can add permitting steps or revisions.
Ways To Save
Plan length and layout to minimize cuts and waste. Assumptions: standard straight runs, two gates, normal yard topography. Consider using fewer gates or combining picket patterns to reduce labor. Selecting pressure‑treated posts or composite caps instead of premium cedar accents can lower upfront costs. Scheduling during mild seasons may reduce crew call‑out costs and improve installation speed.
Regional Price Differences
Regional variation affects both material availability and labor rates. In the Northeast, expect higher labor costs and permit fees. The Midwest often offers mid‑range pricing; the West Coast may be higher due to transport and material sourcing. Typical regional deltas are ±10% to ±25% from national averages, depending on urban density and local supply chains.
Labor & Installation Time
Install time depends on fence length, terrain, and gate count. A basic straight 60‑ft run with two gates commonly takes 1–2 days for a two‑person crew. The data-formula=”labor_hours × hourly_rate”> formula can help estimate cost: labor_hours multiplied by the crew’s hourly rate yields total labor cost. Expect longer timelines in rocky soil or sloped yards, which raise both time and cost.
Real-World Pricing Examples
Basic scenario covers a 50‑ft run, 6‑ft panels, minimal finish. Materials: $6 per ft; Labor: $12 per ft; Permits: $0; Total: about $1,100–$1,700. Assumptions: knotty cedar, standard rails, no gates.
Mid‑Range scenario uses 75‑ft length with two gates and a basic stain. Materials: $10 per ft; Labor: $18 per ft; Permits: $100; Total: about $2,000–$3,000. Assumptions: select cedar, standard hardware.
Premium scenario features 100 ft, clear cedar, premium hardware, three gates, and extra post caps. Materials: $15 per ft; Labor: $26 per ft; Permits: $350; Total: about $3,500–$5,000. Assumptions: higher‑grade cedar, enhanced finish.
