Prices for Cambria Smithfield quartz countertops vary by thickness, edge profile, and installation scope. The main cost drivers are material price per square foot, fabrication time, and crew hours for removal, install, and cleanup. This article provides practical USD ranges to help buyers budget accurately and compare quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Countertop Material (Smithfield Quartz) | $35 | $50 | $70 | Per sq ft; typical 2 cm or 3 cm slabs |
| Fabrication & Edge Profiles | $15 | $25 | $40 | Edge like 1.25″ ogee, full bullnose |
| Installation Labor | $20 | $40 | $60 | Hours-based or per sq ft |
| Templates & Fabrication Time | $5 | $15 | $25 | Prep and cutting |
| Delivery & Handling | $5 | $10 | $20 | Fuel and trucking |
| Permits & Code Fees | $0 | $0 | $150 | Typically not required for countertops |
| Waste/Disposal | $0 | $5 | $15 | Offcuts & debris removal |
| Tax | $0 | $0 | $10 | Depends on locality |
Assumptions: region, specs, labor hours.
Overview Of Costs
Cambria Smithfield quartz costs typically range from $60 to $120 per square foot installed for standard projects, depending on thickness, edge profile, and shop fabrication. Material costs alone commonly run $40–$70 per sq ft, with fabricated edges adding $15–$40 per sq ft. For a 40 sq ft island or perimeter, total project ranges commonly fall between $2,400 and $6,000 before tax and disposal. Per-unit pricing helps compare quotes across brands and installers.
Two quick benchmarks to anchor budgeting: materials plus fabrication often equals $55–$95 per sq ft; installation-only charges (labor, templates, and disposal) usually add $25–$50 per sq ft. Realistic budgets must include edge customization, seam work, and any removal of old countertops.
Cost Breakdown
The breakdown below shows how a typical Cambria Smithfield install aggregates costs, with totals and per-unit guidance. The table uses a mix of totals and per-square-foot estimates to reflect common contractor invoicing.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $40/sq ft | $50/sq ft | $70/sq ft | Smithfield quartz, 2 cm–3 cm options |
| Labor | $20/sq ft | $40/sq ft | $60/sq ft | Measuring, templating, cutting, edge fabrication |
| Equipment & Fabrication | $5/sq ft | $15/sq ft | $25/sq ft | Sawing, polishing, polishing wheels |
| Permits | $0 | $0 | $150 | Usually not required for residential countertops |
Regional variations and project specifics can shift totals by ±15–25% depending on locale, labor markets, and access to delivery routes.
Pricing Variables
Key price drivers for Cambria Smithfield include thickness (2 cm vs 3 cm), edge profile (straight edge vs. elaborate profiles), and seam placement. A thicker slab or a complex edge profile adds material and fabrication time. For example, a basic 2 cm edge perimeters project may trend toward the lower end, while 3 cm with a waterfall edge or large-radius corner can push the high end. Additionally, the proportion of island vs. run increases labor and templating time.
Cost Drivers
Other factors shaping price include cabinets/backsplash integration, cutouts for sinks and outlets, and any removal of existing countertops. If a project requires reshaping cabinet openings or re-surfacing undersides, expect additional hours and costs. Materials can vary by color availability and stock levels, sometimes affecting lead times and price fluctuations.
What Drives Price
Regional labor rates and delivery distance contribute to final bills. In urban markets, installer crews may charge more per hour than rural areas. Shop fabrication lead times and local demand for premium quartz can also influence the installed cost. Seasonality can affect scheduling and may yield minor discounts during slower months.
Ways To Save
Strategies to cut costs include selecting standard edge profiles, reducing waste by planning with exact sheet layouts, and consolidating fabrications in a single visit. If feasible, choosing 2 cm thickness instead of 3 cm and avoiding specialty edge treatments can reduce material and fabrication charges. Bulk scheduling with a single contractor may also lower travel or delivery fees.
Regional Price Differences
Price variations by region can be notable. In the table below, three regional patterns show typical deltas relative to a national baseline:
- Coastal Metropolitan: +10% to +20% due to higher labor and delivery costs
- Midwest Suburban: baseline region with moderate costs
- Rural Southwest: -5% to -15% driven by lower labor rates and logistics
Real-World Pricing Examples
Three scenario cards illustrate typical quotes for Cambria Smithfield, with varying scope and components. Each includes labor hours, per-unit prices, and totals, with different part lists to reflect real project choices.
Scenario: Basic Project
Specs: 40 sq ft, 2 cm thickness, straight edge, standard sink cutout. Labor hours: 12. Parts: materials, fabrication, installation only. data-formula=”labor_hours × hourly_rate”>
Estimated: Materials $40–$50/sq ft; Installation $25–$40/sq ft; Total $2,400–$3,800 before taxes/fees.
Scenario: Mid-Range Project
Specs: 50 sq ft, 3 cm thickness, beveled edge, one seam. Labor hours: 18. Parts: materials, edge fabrication, template, disposal. data-formula=”labor_hours × hourly_rate”>
Estimated: Materials $45–$60/sq ft; Fabrication/Edge $20–$30/sq ft; Installation $30–$45/sq ft; Total $3,600–$6,000.
Scenario: Premium Project
Specs: 60 sq ft, 3 cm, waterfall edge, multiple cutouts, island. Labor hours: 26. Parts: premium edge, seam work, remove old countertops, disposal. data-formula=”labor_hours × hourly_rate”>
Estimated: Materials $55–$70/sq ft; Edge/Fabrication $25–$45/sq ft; Installation $40–$60/sq ft; Total $5,000–$9,500.
