Readers typically see a total installed price for Cambria quartz ranging from $75 to $125 per square foot, depending on thickness, edge profiles, and labor. The main cost drivers are slab material, edge work, surface preparation, and removal of existing countertops. This article presents clear cost ranges in USD, with per-square-foot and total estimates to aid budgeting.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (Cambria Quartz) per sq ft | $40 | $60 | $70 | Typical slab pricing before fabrication |
| Edge & Surface Finish (per sq ft) | $10 | $15 | $25 | Bevel, eased, ogee options vary |
| Labor & Fabrication (per sq ft) | $20 | $30 | $40 | Cutting, polishing, seam work |
| Installation (per sq ft) | $10 | $25 | $35 | Removal of old counters may add |
| Permits & Deliveries (per project) | $0 | $50 | $150 | Region dependent |
| Total Installed Cost (per sq ft) | $75 | $125 | $195 | Assumes standard 2 cm or 3 cm slabs |
Overview Of Costs
Cambria quartz price per square foot varies by thickness, edge profile, and regional labor rates. The protected, non-porous surface itself is a premium material, but most projects incur additional costs for finishing, seam work, and removal of existing countertops. For budgeting, assume a typical project range of $75-$125 per sq ft installed, with higher-end profiles and larger projects pushing toward the $150 per sq ft mark in some markets.
Cost Breakdown
The following table breaks down common cost components for Cambria quartz countertops. Assumptions include standard 2 cm or 3 cm thickness, 25–40 linear feet of counters, and typical corner work. The sheet also accounts for both per-square-foot charges and fixed project items.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $40 | $60 | $70 | Cambria slabs, color and pattern affect price |
| Labor & Fabrication | $20 | $30 | $40 | Cutting, edge routing, polishing |
| Edge & Finish | $10 | $15 | $25 | Custom edge profiles add cost |
| Installation | $10 | $25 | $35 | Seaming and leveling included |
| Permits | $0 | $50 | $150 | Region dependent |
| Delivery/Removal | $0 | $25 | $75 | Old countertop removal may increase |
| Overhead & Contingency | $5 | $10 | $20 | Shop overhead, small contingencies |
| Taxes & Misc. | $0 | $5 | $20 | Sales tax varies by state |
What Drives Price
Key price factors include thickness (2 cm vs 3 cm), color/texture, seam count, and edge type. Cambria quartz costs also reflect regional labor markets and material availability. Heavier or larger install spaces require more scaffolding, cutting, and routing, increasing both time and material waste. Tougher sinks, larger islands, and unusual cabinetry layouts typically raise project totals beyond the baseline.
Cost Drivers
Project price is affected by three primary drivers: (1) material selection and slab width; (2) edge profiles (e.g., straight, eased, waterfall, bevel); (3) installation complexity, including seam work and cabinet alignment. A 6–8 ft island with a dramatic edge and two seams can push per-sq-ft costs toward the higher end of the range, while a simple L-edge, standard color, and limited seams stay near the average.
Regional Price Differences
Prices vary by region due to labor and delivery costs. In the West vs Midwest vs South, expect ±10% to ±20% differences on installed totals. Urban markets often trend higher due to higher labor rates and logistics. Rural areas may see lower installation charges but potential delivery premiums if distributors are scarce. The table below illustrates typical deltas.
Labor, Hours & Rates
Labor time depends on project scope, island complexity, and slope transitions. Typical installation times range from 1.0 to 2.5 days for a standard kitchen, translating to labor costs of approximately $25-$40 per sq ft on average, depending on crew size and local rates. Larger projects or intricate backsplashes add hours and raise the per-square-foot average.
Additional & Hidden Costs
Hidden items may appear in invoices. Common extras include old countertop disposal, sink cutouts, unusual faucet openings, backsplash integration, and final clean-up. Some shops charge for template visits or travel if the project site is far from the fabrication shop. Always request a line-item estimate to avoid surprises.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes for Cambria quartz countertops in U.S. homes. Each scenario uses a 24–30 linear feet run with standard and optional features. Assumptions: region, specs, labor hours.
- Basic: 25 sq ft, standard 2 cm slab, straight edge, minimal seam work. Materials $1,000; Fabrication $750; Installation $500; Deliveries $0; Total around $2,250; per sq ft $90.
- Mid-Range: 40 sq ft, 3 cm slab, eased edge, two seams, island edge, moderate complexity. Materials $2,000; Fabrication $1,200; Installation $1,000; Delivery $75; Total around $4,275; per sq ft $107.
- Premium: 60 sq ft, 3 cm slab, waterfall edge, heavy seam work, complex island. Materials $3,600; Fabrication $1,800; Installation $1,600; Delivery $150; Total around $7,150; per sq ft $119.
Ways To Save
Cost-saving strategies include choosing a standard edge, opting for a common color and pattern, and planning alignments to minimize seams. Shop multiple quotes from certified fabricators and request a price breakdown to compare materials, labor, and delivery. If possible, combine countertop scopes with backsplash or vanity installations to leverage installer travel and workload efficiency.
