In U.S. pricing, Cambria countertop cost typically depends on slab grade, edge detail, and installation complexity. The main drivers are material thickness, design pattern, cutouts, and labor. Cost ranges below reflect standard kitchen projects with mid-grade edges and typical layout.
Assumptions: region, slab selection, edge profile, and standard installation crew.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Countertop Material (Cambria slabs) | $60/sq ft | $80-$110/sq ft | $130+/sq ft | Most common sizes: 2 cm and 3 cm slabs; extra for rare patterns |
| Edge Profile | $0.00 | $10-$40/linear ft | $70/linear ft | Standard eased edge vs. statement profiles add cost |
| Installation Labor | $1,000 | $2,000-$4,000 | $6,000+ | Includes fabrications, fitting, and seaming |
| Cutouts & Sinks | $100-$300 | $400-$900 | $1,200+ | Integrated vs. drop-in sink impacts cost |
| Removal/Delivery/Disposal | $100-$300 | $300-$600 | $1,000 | Weight and distance influence fees |
Overview Of Costs
Typical price range for a standard 30–40 square foot Cambria project is $4,800-$9,500, depending on edge choice and layout. The per-square-foot spread commonly falls between $80 and $140, with installation and fabrications pushing totals higher for complex kitchens. Per-unit ranges assume 3 cm slabs and straightforward vented cutouts.
Cost Breakdown
| Component | Low | Average | High | Notes | Formula |
|---|---|---|---|---|---|
| Materials | $60/sq ft | $80-$110/sq ft | $130+/sq ft | Cambria slabs; 2–3 cm common | data-formula=”price_per_sq_ft × area”> |
| Labor | $1,000 | $2,000-$4,000 | $6,000+ | Measuring, templating, installation | data-formula=”labor_hours × hourly_rate”> |
| Edge & Surface Finishes | $0 | $10-$40/ft | $70/ft | Standard bevel vs. elaborate edges | |
| Cutouts & Sinks | $100 | $400-$900 | $1,200 | Reinforced edges add cost | |
| Delivery & Disposal | $100 | $300-$600 | $1,000 | Weight and distance dependent |
What Drives Price
Material quality and pattern complexity are major cost levers. Cambria offers many designs, but higher-end patterns require more slab waste management and precise layout. Other drivers include edge profile choice, sink and cooktop cutouts, and overall kitchen size.
Factors That Affect Price
Regional labor rates and installation complexity frequently shift final quotes. Urban areas tend to be higher due to skilled labor demand, while rural projects may see lower rates. Seamless corners and heavy-duty prep add to both time and material costs.
Ways To Save
Pooling multiple countertop projects with a single installer can reduce per-project overhead. Some suppliers offer bulk discounts on slabs and factory templating. Choosing standard edge profiles and avoiding custom patterns is another straightforward savings.
Regional Price Differences
Prices vary by region, influenced by labor markets and freight. In the Northeast, total project costs can be 5–12% higher than national averages; the Midwest is near the baseline; the West Coast may run 8–15% higher due to material mix and installation costs. Adjust expectations by ±% deltas when comparing bids from different regions.
Labor, Hours & Rates
Install time and crew size directly impact total cost. A typical two-person crew may complete a standard kitchen in 1–2 days, but complex layouts or unusual edges extend this period. Labor can account for 40–60% of total price in many projects.
Real-World Pricing Examples
Three scenario cards illustrate typical setups and costs.
-
Basic — 30 sq ft, standard 3 cm slab, standard eased edge, no extra cutouts.
Labor: 1.5 days; Materials: $2,400; Total: $3,900-$4,600; per sq ft: $130-$153. -
Mid-Range — 40 sq ft, 3 cm, ogee edge, 2 cutouts, standard sink.
Labor: 2 days; Materials: $3,200; Total: $6,000-$7,200; per sq ft: $150-$180. -
Premium — 50 sq ft, 3 cm, complex edge, multiple cutouts, integrated sink.
Labor: 2.5–3 days; Materials: $4,000; Total: $9,000-$11,400; per sq ft: $180-$228.
Assumptions: region, slab selection, edge profile, and standard installation crew.
