Buyers typically spend a broad range for stock cabinets from a retailer like Cabinets to Go, driven by cabinet box material, door style, hardware, and installation needs. The main cost drivers include cabinet quantity, finish options, and any required alterations to fit the space.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinet Boxes | $100/ft | $180/ft | $350/ft | Stock laminates to wood veneer |
| Door & Drawer Fronts | $50/ft | $120/ft | $280/ft | Inset, overlay, or shaker styles |
| Hardware & Accessories | $5/ft | $20/ft | $60/ft | Soft-close hinges, pulls, organizers |
| Installation & Labor | $30/ft | $60/ft | $120/ft | Rough-in, leveling, trimming |
| Delivery & Handling | $100 | $350 | $800 | Based on distance and weight |
| Contingency & Overhead | $5,000 | $7,500 | $12,000 | Shop costs and project padding |
Assumptions: region, kitchen size, cabinet style, and labor hours.
Overview Of Costs
Overview: Typical project ranges for Cabinets to Go stocks the range from a budget setup to a mid-range kitchen remodel. A small, existing layout with standard doors may cost around $2,500-$6,000, while mid-size projects with upgraded finishes can run $6,000-$12,000. High-end or large-format configurations may exceed $15,000 or more, especially with premium wood species or full-height towers.
data-formula=”Total = (Cabinet Boxes + Doors) + (Hardware) + (Labor) + (Delivery) + (Overhead) + (Taxes)”>Assumptions: 10–20 linear feet, standard installation, and basic hardware included.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2,000 | $5,000 | $12,000 | Cabinet boxes, doors, drawers, finish |
| Labor | $1,500 | $3,500 | $7,000 | Install, leveling, adjustments |
| Equipment | $100 | $400 | $1,000 | Tools, fasteners, spacers |
| Permits | $0 | $200 | $800 | Rough modifications if required |
| Delivery/Disposal | $100 | $350 | $800 | Transportation and packaging removal |
| Warranty | $0 | $150 | $500 | Limited manufacturer coverage |
| Overhead | $200 | $900 | $2,000 | Shop and project management |
| Taxes | $180 | $900 | $2,500 | State and local sales tax |
Assumptions: standard 10–20 ft run, stock finishes, and no major structural work.
What Drives Price
Key price drivers include cabinet style and materials, available finishes, and the number of cabinet runs. Stock layouts at Cabinets to Go often use thermofoil or plywood boxes with a wide range of door designs. The more complex the layout (islands, tall cabinets, pantry towers), the higher the labor and materials costs.
Other important factors are hardware quality, soft-close mechanisms, and whether cabinet interiors include features like pull-out organizers or built-in dividers. Additionally, installation time varies with wall geometry, ceiling height, and alignment requirements. A typical 10–15 hour install is common for a straightforward job, while larger spaces may require 20–40 hours.
data-formula=”LaborHours × HourlyRate”>Assumptions: standard kitchen geometry, mid-range finishes.
Ways To Save
Buy in bulk and select standard finishes to reduce per-foot costs. Choosing stock door styles and minimizing specialty organizers can lower both material and labor charges. Scheduling installation during off-peak seasons may yield lower rates or promotions from retailers and local pros.
Plan measurements precisely to avoid rework, and verify cabinet dimensions against existing plumbing and electrical layouts. If possible, consolidate changes into a single project to reduce multiple site visits and delivery trips.
Regional Price Differences
Prices vary by region due to labor rates and shipping costs. In the Northeast, you might see higher installation fees compared to the Southeast, while the Mountain and Pacific regions often reflect higher material shipping costs. A three-region snapshot shows typical deltas of +/- 10–25% from national averages.
Urban markets tend to be 15–25% higher for delivery and installation than rural areas, driven by labor demand and access. Suburban markets generally fall between urban and rural pricing. The impact of regional differences should be rolled into the total estimate when shopping across stores.
Real-World Pricing Examples
Basic Scenario: 10 ft of stock box cabinets with standard doors, basic hardware, local installation. Labor hours: 12; Materials: $2,400; Labor: $1,200; Delivery: $150; Total: $3,900.
Mid-Range Scenario: 15 ft with upgraded doors, soft-close hardware, and crown molding. Labor hours: 18; Materials: $5,000; Labor: $2,000; Delivery: $250; Total: $7,250.
Premium Scenario: 20 ft with premium wood boxes, full-height towers, glass-front uppers, premium hardware, and professional installation. Labor hours: 28; Materials: $9,000; Labor: $4,000; Delivery: $400; Total: $13,400.
Assumptions: region, specs, labor hours.
