Homeowners typically pay a mix of materials, installation, and site factors when brick siding is chosen. The primary driver is whether brick is installed as full brick, brick veneer, or reclaimed brick accents. The following pricing focuses on brick siding installed per square foot and includes ranges for materials plus labor.
Assumptions: region, brick type, wall height, and labor hours vary by project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Brick Siding (installed, per sq ft) | $12 | $18 | $28 | Brick veneer commonly; solid brick higher. |
| Materials (bricks, mortar, anchors) | $6 | $12 | $20 | Depends on brick type and bond pattern. |
| Labor (installation, per sq ft) | $3 | $6 | $8 | Includes setting, tapping, and finishing. |
| Preparation & Minor Repairs | $1 | $2 | $4 | Wall prep, flashing, and substrate work. |
| Delivery/Disposal | $0.50 | $1.5 | $3 | Depends on access and waste volume. |
| Warranty (statutory/1–2 years) | $0.50 | $1 | $2 | Limited workmanship or material coverage. |
Overview Of Costs
Typical cost range for brick siding installed is $18-$28 per square foot, with materials contributing roughly $6-$20 and labor about $3-$8 per square foot. For most homes, a full brick veneer installation costs less than solid brick but provides the same exterior look. Projects usually include wall prep, brick delivery, mortar, flashing, and clean-up. On larger homes, per-square-foot costs may decrease slightly due to efficiency, while tight corners or tall walls can raise the overall price.
Cost Breakdown
The following table summarizes the main cost components, combining total ranges with per-square-foot figures. The values reflect typical U.S. pricing for mid-sized brick veneer installations on standard-grade walls.
| Component | Low | Average | High | Assumptions |
|---|---|---|---|---|
| Materials | $6 | $12 | $20 | Brick type, bond pattern, and size influence cost. |
| Labor | $3 | $6 | $8 | Crew size, height, and accessibility affect time. |
| Preparation & Repairs | $1 | $2 | $4 | Substrate fixes and moisture barriers included. |
| Delivery/Disposal | $0.50 | $1.50 | $3 | Waste handling varies by site. |
| Warranty | $0.50 | $1 | $2 | Contractor coverage duration varies. |
| Total (installed, per sq ft) | $12 | $18 | $28 | Sum of components above. |
| Total (project basis) | N/A | N/A | N/A | Multiply per-sq-ft by wall area; add contingencies. |
What Drives Price
Brick type, bond pattern, and wall complexity are major price drivers. Veneer costs are typically lower than solid brick because less mass is handled. A standard brick veneer on a 2,000-sq-ft home can range widely based on pattern and height. Additional factors include wall height, openings, parapets, and the presence of chimneys. Sealing and moisture barriers, flashings, and window/door trims add to the final bill. The region and local labor market are also important determinants.
Factors That Affect Price
Regional price differences can swing cost by 15–25% between markets. Urban areas with skilled bricklayers often quote higher rates than rural regions. Climate and building codes influence required moisture barriers and structural considerations, raising costs in some zones. Brick veneer installations demand precise alignment and curing time, which can extend project duration and labor hours in intricate designs or multi-story homes.
Ways To Save
Consider alternatives like brick veneer over full brick, or scale patterns to reduce material waste. Selecting standard brick sizes, a common bond pattern, and minimizing custom trim can lower both material and labor costs. If a full remodel is planned, bundling brick work with other exterior tasks may earn contractor efficiency benefits. Scheduling work in off-peak seasons and obtaining multiple quotes helps secure competitive pricing.
Regional Price Differences
Prices vary across regions due to labor supply, transport costs, and housing density. In the Northeast, expect higher installed per-square-foot pricing than in the Midwest, with the West generally nearing the higher end due to labor demand. The South often presents moderate costs, tempered by milder climates and lower winter-related demand. For a 2,000-square-foot project, regional deltas can range from -10% to +20% relative to a national middle value.
Real-World Pricing Examples
Scenario A — Basic (Brick veneer, standard brick, single story): 2,000 sq ft, standard bond, minimal custom trim; materials $12,000, labor $12,000, prep $2,000, delivery $3,000, total around $29,000. Per sq ft: $14.50. Assumptions: suburban location, standard height, no major repairs.
Scenario B — Mid-Range (Brick veneer, decorative bond, two stories): 2,200 sq ft, above-average brick, added flashing and window trim; materials $22,000, labor $20,000, prep $3,000, delivery $3,500, total around $48,500. Per sq ft: $22.05. Assumptions: mixed urban-suburban site.
Scenario C — Premium (Solid brick, custom bond, two stories, high arches): 2,500 sq ft, premium brick, extensive trim, specialty mortar; materials $40,000, labor $32,000, prep $6,000, delivery $5,000, total around $83,000. Per sq ft: $33.20. Assumptions: high-end home, complex geometry.
Cost Drivers By Subcategory
Material type and brick size strongly influence unit cost; larger bricks and specialty textures raise price. Bond pattern (e.g., running, Flemish, or stack bond) affects cut waste and labor time. Wall geometry (arches, copings, corners) increases handling, layout time, and potential waste. Site access impacts delivery costs and crew efficiency, especially on multi-story builds.
Price By Region
Compare three regional profiles to see how local markets shift numbers. In the Northeast, project totals trend higher due to material and labor costs; the Midwest often presents mid-range pricing with strong value for veneer options; the Southwest may show higher rock and mortar expenses but lower labor in some markets. Expect regional adjustments of roughly -15% to +25% relative to national averages.
What To Ask Contractors
Request itemized quotes that separate materials, labor, prep, and delivery. Confirm brick type, bond pattern, and wall height. Ask about moisture barriers, flashing, and warranty coverage. Inquire about crew size, estimated duration, and whether disposal and permit fees are included. A clear estimate reduces surprises during the project.
Pricing FAQ
Is brick siding cheaper than stucco or vinyl siding? In many cases, brick veneer is more expensive upfront than vinyl but comparable to or slightly less than some premium stucco options, depending on design and labor. Can I install brick veneer myself? It is technically possible, but installation requires specialized masonry skills for proper alignment and mortar work; most homeowners hire pros for best results.
