Homeowners typically spend a range on bathroom cabinet cost that reflects cabinet size, material quality, finish, hardware, and installation. This guide breaks down common price drivers and provides clear low-average-high ranges to help budget decisions.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Bathroom cabinet set (base + wall) | $800 | $1,600 | $4,000 | Includes 20–40 inches of base + wall storage, basic hardware |
| Custom single vanity (60″) | $2,000 | $4,000 | $8,000 | Solid wood or plywood with plywood shelves |
| Semi-custom (melamine/laminate) | $1,000 | $2,500 | $4,500 | Pre-fit cabinets, standard finishes |
| Labor & installation | $600 | $1,400 | $3,000 | Includes mounting, alignment, shelving |
| Countertop combined with cabinet | $400 | $1,200 | $3,000 | Laminate, granite, quartz options vary widely |
| Hardware upgrades | $50 | $250 | $800 | pulls, hinges, soft-close mechanisms |
Assumptions: Midwest labor rates, standard 20–40 inch base units, common plywood or medium-density fiberboard (MDF) construction, standard finishes, no custom carvings.
What Buyers Usually Pay for Bathroom Cabinet Cost
Most buyers see a total price that blends cabinet components, hardware, delivery, and installation. A typical project from 40–60 inches of base and wall cabinets in a mid-range finish lands around $1,600–$3,000, with per-unit costs ranging $150–$450 per linear foot depending on material and hardware. In higher-end projects, such as a full custom 72″ vanity with quartz countertop, expect $4,000–$8,000 total. Factors like door style, interior organizers, and premium finishes push costs up. Assumptions include standard access, no countertop replacement, and DIY-ready rough-in for plumbing where possible.
Per-unit pricing examples: base cabinetry often runs $200–$350 per linear foot installed, while full real-wood frames with soft-close hardware can be $350–$500 per linear foot. For mid-range laminate or thermofoil, plan $150–$250 per linear foot. Regional variance can add or deduct a few hundred dollars depending on labor market strength.
The quote typically separates materials, labor, and hardware. A standard breakdown helps compare apples to apples when shopping. The table below shows common cost blocks and typical dollar ranges.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (frames, doors, panels) | $500 | $1,500 | $4,000 | Laminate and MDF vs solid wood |
| Labor (assembly, mounting, leveling) | $400 | $1,000 | $2,200 | Approx. 6–12 hours depending on scope |
| Hardware (soft-close, pulls, hinges) | $40 | $180 | $500 | Upgrade path from standard to premium |
| Delivery/Installation access | $50 | $150 | $350 | Stairs, elevator access affect price |
| Countertop integration | $0 | $600 | $2,000 | Stone or quartz adds cost |
| Permits/fees | $0 | $100 | $400 | Typically not required for cabinets alone |
Formula note: illustrates how labor scales with project size and local rates.
Width, depth, and door count directly impact bathroom cabinet cost. A 60″ double vanity configured with 3 doors and 6 drawers generally costs more than a 40″ single with 2 doors. For base units, plan $200–$350 per linear foot installed; for 60″ of wall cabinets with three adjustable shelves, expect $900–$1,800 in materials plus $400–$1,000 in labor. If you upsize to a 72″ double vanity with premium wood and soft-close hardware, prices commonly rise to $3,000–$6,000 total.
Labor time grows with installation complexity. A wall cabinet run in a tight bathroom may add 1–2 hours of labor, while plumbing relocations or wall rerouting can push total hours to 12–20. Regional wage differences contribute another 5–15% variance.
Prices shift by metro area and climate zone. In coastal cities with high labor demand, expect averages at the top of ranges; in smaller inland markets, prices trend toward the lower end. A 60″ base and 36″ wall cabinet set might run $1,200–$2,400 in Midwest markets, $2,200–$3,800 in Northeast markets, and $2,000–$3,900 in coastal markets. Delivery logistics and installer availability can tilt bids by 10–20% between regions.
Finish choices and hardware quality add noticeable cost. A standard thermofoil door package may cost $150–$350 per linear foot, while real-wood doors with carved panels can push to $350–$500 per linear foot installed. Premium hardware such as full-extension soft-close drawers, obscured hinges, and satin nickel or bronze pulls add $100–$400 total for a mid-size project. For a 60″ vanity, expect roughly $600–$1,200 in hardware upgrades when upgrading beyond basic stock options.
Smart choices cut cost without sacrificing function. Consider frameless thermofoil or laminate cabinets instead of solid wood for medium budgets, or choose prefinished plywood boxes with MDF doors. Opt for standard sizes to reduce custom fit charges, and request adjustable shelves over fixed ones. Scheduling installations during slower seasons can lower labor rates by about 5–15% in many markets. Bundling cabinet purchase with countertop replacement also often yields a 5–10% overall discount.
Delivery, prep, and disposal fees can surprise. Some bids itemize delivery, packaging removal, and cabinet haul-away separately. Quick-turn installations or sites with limited access may incur rush fees or weekend surcharges. If water lines or electrical work are needed for integrated sinks, budget an extra $200–$600. For projects requiring demolition or patchwork to the wall, reserve another $400–$1,000.
Three representative quotes illustrate typical ranges by scope. Example A: 40″ base + 36″ wall, laminate, standard hardware, Midwest region — materials $900, labor $700, delivery $100, total $1,800. Example B: 72″ double vanity with quartz countertop, solid wood doors, soft-close hardware, Northeast region — materials $3,200, labor $1,600, countertop $1,100, delivery $150, total $6,050. Example C: 60″ single vanity, prefinished plywood boxes with premium hardware, Southeastern region — materials $1,400, labor $900, delivery $120, total $2,420.
Numeric benchmarks help compare bids quickly. Per linear foot installed often ranges $200–$350 for laminate, $300–$500 for solid wood, and $350–$600 for premium solutions with full-extension hardware. Per bathroom set (60–72 inches total) commonly lands in the $1,800–$5,000 zone depending on material, finish, and countertop integration. Keep in mind that the countertop, sinks, and plumbing configuration can shift totals by several hundred to a few thousand dollars.
