A typical Azek siding project costs a range per square foot, driven by material grade, house size, and installation specifics. This guide presents cost, price, and budget ranges in USD to help buyers plan and compare options.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Total Project | $6,000 | $12,000 | $22,000 | Full exterior, including removal and disposal |
| Cost Per Sq Ft | $3.50 | $6.50 | $12.50 | Assumes standard 1500–1800 sq ft home |
| Materials | $2.00 | $4.00 | $9.00 | Cladding panels, accessories |
| Labor | $1.00 | $2.50 | $4.50 | Install, nails, adhesives |
| Equipment | $0.25 | $0.75 | $1.50 | Scaffolding, overhead lifts |
| Permits | $0 | $500 | $2,000 | Local permit requirements |
| Delivery/Disposal | $0 | $600 | $2,000 | Packaging, haul-off |
| Warranty | $50 | $300 | $1,000 | Manufacturer and installer coverage |
| Overhead | $200 | $800 | $2,000 | Permitting, admin, profit |
| Contingency | $400 | $1,200 | $3,000 | Unforeseen costs |
| Taxes | $100 | $600 | $1,800 | Sales tax varies by state |
Overview Of Costs
Azek siding price per square foot typically falls between $3.50 and $12.50 for installed work, depending on grade, substrate, and complexity. For a mid-range project on a 1,500–1,800 sq ft home, expect roughly $6.50 per sq ft as a baseline, with higher-end profiles and premium finishes pushing toward the upper end. The total project often ranges from about $6,000 to $22,000 when removal, disposal, and accessories are included.
Assumptions: region, specs, labor hours.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.00 | $4.00 | $9.00 | Azek trim, panels, corners |
| Labor | $1.00 | $2.50 | $4.50 | Removal, installation, sealing, flashing |
| Equipment | $0.25 | $0.75 | $1.50 | Scaffolding, lifts, safety gear |
| Permits | $0 | $500 | $2,000 | Local code approvals |
| Delivery/Disposal | $0 | $600 | $2,000 | Scrap removal |
| Warranty | $50 | $300 | $1,000 | Material and workmanship |
| Overhead | $200 | $800 | $2,000 | Administrative costs |
| Contingency | $400 | $1,200 | $3,000 | Budget cushion |
| Taxes | $100 | $600 | $1,800 | State and local taxes |
| All-in Total | $6,000 | $12,000 | $22,000 | Typical project range |
What Drives Price
Pricing variables for Azek siding include board profile (flat vs embossed), color and finish, substrate condition, and roofline complexity. A higher-end profile with darker color hues and intricate trim increases material cost and installation time. Siding that requires extensive corner work, custom flashing, or curved walls adds to labor and equipment needs. SEER-rated insulation or additional vapor barriers influence the overall budget.
data-formula=”labor_hours × hourly_rate”>
Factors That Affect Price
Regional labor costs impact the installed price; urban markets typically command higher rates than rural areas. The complexity of the home, including three-story elevations or multiple chimney stacks, translates to longer install times and more scaffolding, elevating costs. Material availability and delivery lead times can also shift pricing within the same window.
Ways To Save
Shop for discount bundles that bundle trim, accessories, and flashing. If feasible, perform exterior prep tasks to reduce contractor labor, and schedule work during off-peak seasons when crews are available at lower rates. Choosing mid-range finishes and standard profiles often yields substantial savings without sacrificing durability.
Regional Price Differences
Prices vary by region. In the Northeast, expect closer to the higher end due to labor costs and shorter construction windows. The Midwest often presents mid-range pricing, while the Southwest can be influenced by material availability and climate-related requirements. Urban areas generally show a +10% to +25% delta versus Rural zones, and Suburban markets tend to sit between these extremes.
Labor & Installation Time
Labor often accounts for 40–60% of the installed price. A standard installation on a flat, single-story home might require 2–4 days, while multistory or complex exteriors extend to 5–8 days. Install time drives crew costs and equipment usage, especially when scaffolding and safety systems are necessary.
Additional & Hidden Costs
Hidden items can include roof edge protection, flashing replacements, and water-resistive barrier upgrades. Some projects incur teardown and disposal fees for existing siding, as well as permit refreshes if local regulations change during installation.
Real-World Pricing Examples
Basic
Spec: standard Azek panels, light color, flat exterior, 1,400 sq ft. Labor: 2 days; total materials $3,000; installed price around $7,000. Per sq ft ≈ $5.00.
Mid-Range
Spec: embossed finish, 1,600 sq ft, full removal and new flashing. Labor: 3–4 days; materials $6,000; total around $12,500. Per sq ft ≈ $7.80.
Premium
Spec: premium profile, darker color, two-story + curved sections, 1,900 sq ft. Labor: 5–6 days; materials $10,000; total near $22,000. Per sq ft ≈ $11.50.
