This article breaks down what buyers typically pay for an aluminum screen door, including the cost, price ranges, and core drivers like size, frame style, mesh type, and finish. The goal is to give a practical, dollar-focused view of both installed and just-door costs so readers can budget accurately.
Common cost factors include door width and height, frame material, screen mesh grade, hardware, and whether installation is included in the quote. The price varies by region and contractor, but typical ranges help buyers compare quotes confidently.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed aluminum screen door | $120 | $250 | $600 | Standard 32×80 door with basic finish |
| Door without installation | $90 | $180 | $350 | Materials only |
| Premium finish or hardware | $30 | $60 | $150 | Bronze/bronze-coated, upgraded knobs |
| Mesh upgrade (Dura, Pet, or Insect Mesh) | $15 | $40 | $90 | Higher-grade mesh lasts longer |
| Warranty extension | $0 | $40 | $120 | Optional coverage |
Aluminum Screen Door Costs by Size and Type
Prices shift with door size and frame style. A basic 32×80 aluminum screen door installed typically ranges from $150 to $350, while larger or custom shapes can reach $400 to $600 with installation. Per-door material costs usually sit in the $100 to $260 range for standard 0.047–0.060 inch thickness frames and mesh. Smaller or economy models skew toward the lower end, and premium designs with decorative frames, heavier gauges, or built-in retractable screens land at the upper end.
Assumptions: standard residential entry, mid-range aluminum, standard fiberglass or aluminum screen mesh, normal access, and regional labor rates. When a contractor includes removal of the old door, disposal fees may add $20–$40 per door.
Major Quote Components for Aluminum Screen Doors
A typical quote splits into materials, labor, and any extras. The table below shows common components and how they influence the total price. Per-unit and installed cost figures help buyers compare apples-to-apples across vendors.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (door, frame, mesh) | $100 | $180 | $310 | Standard alloy, basic finish |
| Labor (installation) | $60 | $120 | $230 | Includes minor framing adjustments |
| Hardware (latches, hinges) | $10 | $25 | $60 | Quality components may raise cost |
| Permits/inspections | $0 | $0–$50 | $150 | Region-dependent |
| Delivery/Remove old door | $20 | $40 | $80 | Includes haul-away sometimes |
| Warranty | $0 | $20 | $100 | Length and coverage vary |
Variables That Drive Aluminum Screen Door Pricing
The final price reacts to several concrete factors. Size and opening width exert the biggest influence; a 36×80 door adds more material and labor than a 30×80 unit. Mesh type, frame thickness, and finish level also shift cost. For example, upgrading from standard vinyl-coated mesh to a pet-resistant or heavier insect mesh adds $15 to $70 per door. A decorative or reinforced frame can push the installed price higher even if the opening remains the same.
Assumptions: standard single-door install, typical home entry, moderate access, mid-range alloy. If the installation requires carpentry adjustments or specialized hinges, expect higher labor hours and a larger total.
Regional Price Variations Across the U.S.
Prices reflect regional factors such as labor costs, material availability, and competition. In the Southeast or Midwest, installed prices may sit near the lower end, while urban West Coast markets can see higher costs. Expect installed ranges of roughly $140–$360 in lower-cost regions and $260–$600 in higher-cost metro areas for standard 32×80 to 34×80 doors.
Assumptions: suburban areas with typical residential access, standard delivery within 20 miles. Long distances or restricted access can add delivery or fuel surcharges.
Labor and Installation Fees for Aluminum Doors
Labor often comprises 40–70% of the installed price depending on local wage levels and door complexity. A simple install may run $70–$140 in labor, while custom fitting, frame rework, or multiple doors can push labor to $180–$320 per job. Scheduling delays and site prep time can add extra costs.
Assumptions: one-door install, standard entryway, normal weather constraints. Severe weather or restricted access can increase the time needed and thus the cost.
Ways to Cut Aluminum Screen Door Price
Cost-conscious buyers can lower the total by adjusting scope and materials. Consider standard mesh instead of premium options, choose a plain finish, or reduce custom hardware. If the current door is damaged beyond repair, replacement can be cheaper than a full panel rebuild. Bundling disposal, cleanup, and multiple doors in a single project often yields a bundled discount.
Assumptions: bulk quotes provided by a single contractor, typical labor rates, and standard disposal needs.
Material and Finish Options by Cost
Material choices range from basic aluminum with a standard baked-on finish to premium 7000-series alloys with decorative contours and powder coatings. A standard, uncoated aluminum frame is usually the least expensive, while powder-coated finishes or dual-color coatings add to the material cost. Mesh choices also affect cost: standard fiberglass is cheaper than high-strength aluminum-coated or pet-resistant mesh.
Assumptions: typical residential entry, mid-range finishing options, standard mesh integrity. Upgrading to a brighter or more durable finish increases the upfront price but may improve long-term maintenance costs.
Warranty and Long-Term Value Considerations
Most aluminum screen doors come with a limited warranty of 1–5 years, with premium options offering longer coverage. Longer warranty often correlates with higher upfront cost but can reduce maintenance expenses over time. Consider the cost of future repairs, screen replacements, and frame corrosion when evaluating price. A lower upfront price may incur higher replacement costs later if the door wears quickly.
Assumptions: standard domestic warranty terms, typical wear from climate exposure. For homes in coastal regions, corrosion resistance becomes a more critical factor in total cost.
Estimated Summary of Aluminum Screen Door Price Ranges
The following summary provides installed price ranges for typical residential openings. Use these as a quick budgeting tool when comparing quotes. All figures assume standard tools, no heavy carpentry, and local labor norms.
| Scenario | Low | Average | High | Notes |
|---|---|---|---|---|
| 32×80 door installed | $150 | $280 | $520 | Standard finish, basic mesh |
| 34×80 door installed | $170 | $310 | $560 | Extra frame material |
| Premium finish or pet mesh | $30 | $60 | $120 | Per door |
| Removal of old door | $20 | $40 | $70 | Not always needed |
Assumptions: single-door install, standard access, regional labor norms, 20-mile service radius. Prices exclude possible permits or inspections required in certain jurisdictions.
