Homeowners typically pay for aluminum doors and windows based on unit size, frame profile, glazing, and installation complexity. This price list highlights the cost ranges you can expect in the U.S., with per-unit and project-wide figures to help budget accurately for both new builds and replacements.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Aluminum window (standard double-hung, 36×58 in) | $280 | $420 | $700 | Includes frame, glazing, hardware |
| Aluminum window (slim profile, 48×60 in) | $420 | $630 | $1,000 | Higher for larger panes |
| Aluminum entry door (35×80 in, insulated) | $1,200 | $1,700 | $2,600 | Includes installation hardware |
| Aluminum sliding patio door (6 ft, insulated) | $1,800 | $2,400 | $3,800 | Includes track and hardware |
| Labor for install (per door/window) | $250 | $500 | $1,100 | Variation by site access |
| Permits and inspections | $50 | $350 | $1,000 | Region-dependent |
| Delivery and removal of old units | $60 | $180 | $600 | Dependent on distance |
Assumptions: Midwest labor rates, standard residential glazing, normal access, typical casement or slide configurations.
Aluminum Window Prices by Size and Frame Type
Prices vary by profile thickness and glazing choices. Standard double-hung units with 3/4 inch glass commonly land in the $280-$420 range for 36×58 inches, while larger 48×60 inch panes push toward $630 on average. Premium profiles with triple glazing or low-E coatings add roughly $100-$300 per unit. In a full home renovation, a mix of sizes often produces an overall window budget around $3,000-$7,000 for a modest set of premium windows, excluding labor.
Door System Choices and Typical Cost Breakouts
Front entry doors in aluminum often include insulation and hardware, with costs starting above typical vinyl alternatives. An insulated aluminum entry door around 35×80 inches commonly ranges from $1,200-$1,700 for the unit, while labor adds $250-$600 depending on frame compatibility and site conditions. High-end or custom sizes can reach $2,500-$3,000 installed. Patio doors with multiple panels typically range $2,000-$3,500 for standard 6-foot configurations, with installation costs of $350-$900.
Regional Price Variations for Aluminum Products
Location matters for both material and labor pricing. Coastal urban markets often show higher ranges than rural inland areas. For aluminum windows, a region with higher window demand and skilled labor tends to push average installed prices up by 10-20% compared with national midpoints. In the Southwest or Southeast, delivery and permitting can also shift costs by $50-$300 per unit. A budget plan should adjust the average estimates by +/-15% based on your ZIP code.
Labor and Installation Costs per Hour for Aluminum Windows
Labor efficiency and crew size drive final totals. Typical window installation labor runs $40-$95 per hour per crew member, with a two-person crew common for standard windows. A full install for a small home might take 1-2 days; larger homes or complex retrofits can extend to 4-6 days. If a contractor uses a premium team with specialty glazing, hourly rates can rise toward the upper end of the range, particularly in markets with high demand. Factor in cleanup and disposal time in the overall labor estimate.
Common Materials and Add-ons that Drive Price
Material choices beyond base aluminum impact cost significantly. Options such as triple glazing, low-emissivity coatings, argon gas fills, and reinforced hardware add $100-$350 per unit. Steel-reinforced doors or decorative exterior finishes may add $200-$500 per door. If frames require special corrosion-resistant alloys for coastal zones, anticipate additional costs per unit. Window grilles, specialty colors, and surface texture finishes also contribute to the total package.
Permits, Delivery, and Disposal Fees in the Price Quote
Permitting can be a notable line item in the total. Expect permit and inspection fees from $50-$400 per unit in many jurisdictions, with some cities charging a flat permit for whole-house projects. Delivery charges generally run $60-$180 per order, while hauling away old windows and doors typically falls in the $100-$600 range, depending on the number of units and local disposal rules. Schedule risk or rush deliveries can add 10-20% to these costs.
Energy-Efficient Performance and Impact on Price
Energy features influence both upfront cost and long-term savings. Aluminum frames with thermal breaks and high-performance glazing can add $100-$350 per unit compared with basic aluminum. The payback period on energy efficiency varies by climate zone, window orientation, and shading. In hot climates, dual-pane or triple-pane configurations with low-E coatings may be worth the incremental price for cooling savings, while in milder climates the premium may be narrower.
Budgeting a Full Replacement vs. Partial Update
Strategic scope choices can cut total project risk. Replacing only high-traffic or sun-exposed units saves money relative to a full home replacement. A partial update often targets standard sizes first, with a phased plan to spread labor costs over time. If existing frames are in good condition, retrofitting new aluminum inserts into old frames can reduce both material and labor costs by about 20-40% per unit, depending on compatibility and condition of the opening. Full replacements typically yield smoother long-term maintenance but start with higher upfront price tags.
Cost Components for Aluminum Doors and Windows
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (frame, glass, hardware) | $250 | $420 | $850 | Profile grade and glazing affect range |
| Labor for install | $250 | $500 | $1,100 | Site access and complexity |
| Equipment use (scissor lifts, hoists) | $50 | $150 | $400 | Needed for large openings |
| Permits | $50 | $350 | $1,000 | By jurisdiction |
| Delivery/Removal | $60 | $180 | $600 | Distance and disposal rules |
| Warranty and service agreement | $0 | $100 | $350 | Duration and coverage vary |
Assumptions: Standard residential openings, mid-range glazing, common installation methods, regional permitting norms.
Strong Price Drivers to Watch
Unit size and system type are the main levers. A 36×58 inch aluminum window with double glazing sits near the lower end, while a 48×72 inch unit with triple glazing and a thermal break can push totals up by 25-50% per unit. The choice between fixed sash vs. operable designs also shifts installation time and labor costs, with operable units typically costing more due to hardware and alignment precision. Regional supply chain conditions can add or subtract several hundred dollars per project when materials are constrained.
How to Compare Quotes Effectively
Two quotes with identical unit counts can differ widely on inclusions. Ensure each quote lists materials, labor, permits, delivery, disposal, warranty, and any required site prep. Ask for per-unit costs for windows and doors, then calculate a rough total by multiplying units by their respective per-unit price and adding regional permit estimates. Require a breakdown for any premium features like low-E glass, argon gas, or decorative grilles so you can compare apples to apples across contractors.
Sample Quote Scenarios
Scenario A: 6 standard aluminum windows and 2 insulated doors in a single-story home. Window units: 6 @ $350 average; Doors: 2 @ $1,600 average; Labor: $1,200; Permits: $300; Delivery/Disposal: $250. Estimated total: $7,350.
Scenario B: 8 larger aluminum windows with triple glazing and a 6-foot sliding door in a two-story residence. Windows: 8 @ $900 average; Door: 1 @ $2,900 average; Labor: $2,400; Permits: $500; Delivery/Disposal: $350. Estimated total: $18,000.
Scenario C: Coastal home requires corrosion-resistant frames and coastal color finish. Each unit adds $150-$300 in material cost, plus potential $200-$400 in coating-related labor, increasing a four-unit project by roughly $1,000-$2,000 beyond standard framing.
