The price for a 2x6x104 5/8 stud typically reflects dimensions, material grade, and regional labor and supply factors. This article breaks down the cost drivers, provides realistic price ranges in USD, and explains how to estimate total project costs for typical residential framing needs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 2x6x104 5/8 Stud (per unit) | $2.50 | $3.75 | $5.50 | Nominal 2×6, actual 1.5×5.5 inches; 104 inches long; typical softwood like SPF or pine |
| Material cost (lumber only) | $2.00 | $3.60 | $5.20 | Depends on grade and species |
| Delivery fee (regional) | $0 | $25 | $75 | Based on distance and supplier policy |
| Minimum order charge | $0 | $25 | $50 | Applied by some suppliers |
| Tax | $0 | $0–$1 | $2 | Depends on state and locality |
Assumptions: Midwest labor rates, standard SPF lumber, normal access, and standard 2×6 framing usage.
Typical price per unit for 2x6x104 5/8 Studs
Costs vary by region and supplier, but typical per-unit price falls in a narrow range. For a single 2x6x104 5/8 stud, buyers commonly see a low of about $2.50, an average around $3.75, and a high near $5.50. The high end generally reflects premium high-grade lumber, rush delivery, or regional shortages. Per-unit price will shift up or down with wood market swings and seasonal demand.
Assumptions: standard green or kiln-dried SPF or southern yellow pine, no added coatings, basic no-frills grade. Prices assume common length stock and no special treatment.
Major cost components in a 2x6x104 5/8 Stud project
Material cost dominates the quote, with smaller shares from delivery, taxes, and small-order fees.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (lumber) | $2.00 | $3.60 | $5.20 | Depends on grade, species, moisture content |
| Delivery | $0 | $25 | $75 | Distance-based |
| Labor (unload/store) | $0 | $10 | $20 | Assumes door-to-site handling |
| Permits/Inspection | $0 | $0 | $0 | Typically not required for simple framing lumber alone |
| Tax and fees | $0 | $0–$1 | $2 | State/local variation |
Variables that most influence the final price
Supply region and season have the strongest impact on 2x6x104 5/8 stud pricing. In regions with limited lumber stock, prices can jump 10–25% during peak construction seasons. Size and grade also drive variance: selecting #2 grade SPF vs. higher-grade pine increases unit cost by roughly 0.50–1.50 per stud. Additionally, longer lead times or backorders can add delivery surcharges or minimum-order penalties.
How length, grade, and species affect cost drivers
Length and grade are direct price levers for this stock length. A standard 104-inch length keeps price near the mid-range, but substitutions to longer bundles or premium species (e.g., incents of pressure-treated lumber) can push per-unit costs up by 0.75–2.50 each. If moisture content or kiln-drying level changes, expect a small price delta as well, typically within 0.25–0.80 per stud.
Regional price differences: what to expect in the Midwest, South, and West
Geography matters for both material and delivery. Midwest markets often show the lower end of the range due to higher local mills, while the West may price a bit higher because of transport costs. The South often sees competitive pricing on common species. Expect per-unit ranges of roughly $2.80–$4.80 in many regions, with delivery added on top as applicable.
Typical project scenarios and per-unit budgeting
Scenario planning helps avoid sticker shock on framing projects. For a small build using 40 studs, budget roughly $160–$200 for materials, plus $50–$100 for delivery if within a local radius. A mid-sized job with 200 studs could land in the $500–$900 material range, with delivery and handling bringing total closer to $600–$1,100.
Per-unit math: quick quotes for a framing run
Using a simple formula helps compare bids. Total cost = (number of studs) × (per-unit price) + delivery + taxes. If per-unit price is $3.75, and you need 150 studs with $60 delivery and $8 tax, total ≈ $3.75 × 150 + 60 + 8 = $563 + 68 = $631. Adjust for regional delivery and grade as needed.
Delivery logistics and how they affect price
Delivery often adds a meaningful line item. Local curbside drop-offs may be free or low-cost, while full-site delivery with offloading can range $40–$150 depending on access, pallet count, and forklift needs. For tight sites, plan for a potential surcharge or additional handling fee.
What to ask suppliers to avoid overpaying
Ask for a bundled price on material, delivery, and minimum charges. Request a per-unit price for 104-inch 2×6 studs in the desired grade, and confirm whether the quote includes disposal or return of damaged bundles. If you anticipate needing more than a single truckload, negotiate a bulk discount or staged delivery to avoid idle inventory costs.
Three real-world example quotes for planning
Examples give practical context for budgeting.
- Example A: 120 studs, #2 SPF, 104 inches, delivery included, tax estimate. Materials $2.90 each, Delivery $40, Tax $6 → Total around $364 + 46
- Example B: 200 studs, No. 2 pine, 104 inches, delivery with lift gate. Materials $4.00 each, Delivery $95, Tax $8 → Total around $800 + 103
- Example C: 500 studs, premium grade pine, 104 inches, regional surcharge. Materials $5.00 each, Delivery $150, Tax $15 → Total around $2,500 + 165
Table of typical price ranges by scenario
| Scenario | Low | Average | High | Notes |
|---|---|---|---|---|
| Residential small job (40–80 studs) | $110 | $160 | $240 | Basic material, local delivery |
| Medium project (100–250 studs) | $250 | $400 | $700 | Mixed species, standard delivery |
| Large project (>250 studs) | $600 | $1,000 | $1,900 | Bulk pricing, tiered delivery |
Ways to reduce the price without sacrificing quality
Scope alignment and timing reduce overall costs. Consider batching orders to avoid multiple delivery fees, choose standard grade lumber over premium, and plan framing during off-peak seasons to capture lower regional rates. If possible, reuse or re-sell leftover studs where feasible, and confirm whether fasteners and accessories are included or sold separately to prevent hidden charges.
