buyers often pay based on grade, length, quantity, and region, with the cost driven by lumber type, finish, and delivery. This article breaks down the price for 2×6 redwood, including ranges in USD per board and per linear foot, plus factors that influence the final quote and practical ways to save.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 2×6 Redwood Lumber (per linear foot) | $1.50 | $2.20 | $3.50 | Natural redwood; common species for framing and trim |
| 2×6 Redwood Lumber (per board foot) | $0.30 | $0.45 | $0.70 | Board foot pricing varies by grade |
| Delivery Fee (regional) | $50 | $120 | $250 | Depends on distance and quantity |
| Labor for Cut-to-Size (per hour) | $40 | $60 | $90 | Sawing, bevels, and prep may be needed |
Assumptions: Midwest labor rates, standard 1×6 to 2×6 sizing, normal access, no specialty finishes.
Price Components for 2×6 Redwood Lumber
Prices break down into materials, labor, and delivery, with small add-ons for waste and handling. This block lists the major cost items and typical ranges you’ll see on a quote.
| Materials | Labor | Delivery/Disposal | Taxes/Permits | Subtotal | Notes |
|---|---|---|---|---|---|
| $1.50-$3.50 per linear ft | $40-$90 per hour | $50-$250 | 5%-8% | $2.00-$6.00 per linear ft + labor | Higher-grade lumber costs more; bulk orders reduce unit price |
Assumptions: standard yard price, no grading surprises, normal access, single delivery.
How Grade and Length Change the Final 2×6 Redwood Cost
Grade and length drive most of the variability in pricing. Lower grades cost less per linear foot, while longer boards push totals up quickly, especially for spans over 10 feet.
Common length impact
Length tiers such as 8 ft, 10 ft, and 12 ft span produce different waste factors and cut allowances, altering the per-foot cost.
Regional Variations That Move the Price Needle
Coastal regions typically see higher prices for redwood than inland markets. Lumber availability, freight distances, and local demand create regional deltas that matter for budgeting.
Labor, Delivery, and Optional Services for 2×6 Redwood
Delivery timing and on-site cutting can add or save costs. Rushed deliveries or on-site cutting and finishing raise the total by tens to hundreds of dollars depending on distance and labor hours.
Practical Ways to Reduce 2×6 Redwood Spending
Choose a closer region, optimize board lengths, and compare quotes. Bundling orders, selecting standard grades, and planning for bulk pickup typically yield the best cost relief.
Three Real-World Quote Scenarios for 2×6 Redwood
Sample quotes illustrate how size, location, and services affect price. Compare these to guide budgeting and quote evaluation.
| Scenario | Board Feet | Length | Price Range | Delivery | Total |
|---|---|---|---|---|---|
| Residential deck framing, 8×16 span | 320 bf | 8 ft | $480-$900 | $90 | $570-$990 |
| Fence posts and rails, 6 ft runs | 260 bf | 6 ft | $390-$780 | $60 | $450-$840 |
| Custom cabinetry framing, 10 ft length | 180 bf | 10 ft | $270-$630 | $120 | $390-$750 |
Substitutes and Sub-Prices to Consider
Engineered wood or alternative softwoods can reduce upfront cost. For projects sensitive to price, compare 2×6 redwood with pressure-treated pine, Douglas fir, or a pine composite option, noting durability and finish differences.
Units, Scopes, and What to Ask Your Lumber Yard
Clarify units and scope when requesting quotes to avoid overages. Specify length, grade, moisture content, and whether delivery includes unloading and risk of loss.
