Prices for 1 1/8 inch plywood vary by species, grade, core type, and location. This article presents clear cost ranges in USD and breaks down the major drivers behind the price so buyers can plan a budget accurately. The focus is on practical pricing for U.S. buyers seeking current 1 1/8″ plywood options.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 1 1/8″ Plywood (4×8 sheet, common species) | $28.00 | $39.00 | $62.00 | Poplar/Light birch, standard grade |
| 1 1/8″ Plywood (4×8 sheet, higher grade) | $45.00 | $58.00 | $90.00 | Birch, maple, or exotic face |
| Minimum purchase (per sheet) | $28.00 | $39.00 | $62.00 | Assumes standard 4×8 sheet |
| Delivery to job site | $0.00 | $25.00 | $60.00 | Depends on distance |
| Bulk/contract price (10+ sheets) | $26.00 | $34.50 | $54.00 | Volume discount |
1 1/8 Inch Plywood Price by Sheet Size and Grade
Typical total price for a standard 4×8 sheet of 1 1/8″ plywood ranges from $28 to $62, depending on the species and face grade. Midrange options, such as common softwood or lighter hardwood faces, typically fall around $39-$58 per sheet. Assumptions: Midwest or Southeast markets, standard lumberyard material, normal access to the sheet pile.
| Material/Grade | Low | Average | High | Notes |
|---|---|---|---|---|
| Softwood core, utility face (1-2 sides) | $28.00 | $40.00 | $52.00 | Common for sheathing and framing |
| Birch or Maple veneer, standard grade | $40.00 | $53.00 | $70.00 | Better flatness and finish |
| Birch/Maple veneer, premium grade | $50.00 | $70.00 | $90.00 | Higher face quality |
| Exotic plywood (high-end face) | $70.00 | $90.00 | $120.00 | Limited availability |
Per-Unit Cost Drivers for 1 1/8 Inch Plywood
Unit pricing often follows the unit sheet, but buyers may encounter per linear foot or per square foot rates for large projects. Typical ranges: per sheet $28-$62; per square foot approximately $3.50-$7.75 when considering waste and cutting. Assumptions: one 4×8 sheet yields about 32 square feet of usable material after trimming.
| Cost Driver | Low | Average | High | Impact |
|---|---|---|---|---|
| Face grade | $28.00 | $39.00 | $62.00 | Affects finish readiness |
| Species | $28.00 | $40.00 | $90.00 | Hardwood faces rise price |
| Sheet format | $28.00 | $39.00 | $62.00 | 4×8 standard |
| Delivery | $0.00 | $25.00 | $60.00 | Regional routing |
Regional Variation in 1 1/8 Inch Plywood Prices
Prices swing by region due to supply, demand, and taxes. West Coast outlets often show higher base prices than the South, while rural markets may add delivery surcharges. Regional deltas commonly range from -15% to +25% around national averages. Assumptions: standard freight corridors, typical urban/suburban markets.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| West | $32.00 | $46.00 | $78.00 | Higher freight and demand |
| Midwest | $29.00 | $40.00 | $65.00 | Balanced pricing |
| South | $28.00 | $38.00 | $62.00 | Lower freight costs |
| Northeast | $30.00 | $44.00 | $70.00 | Urban supplier premiums |
Labor and Handling: Plywood Installation and Cutting
When counting installed cost, include labor for cutting, edge treatment, and fastening. Typical contractor estimates: $1.50-$3.00 per sq ft for on-site cutting and handling, plus fasteners and sealants. Assumptions: standard crew size, basic trimming, no specialized finish work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| On-site cutting and fastening | $0.80 | $1.90 | $3.00 | Per sq ft |
| Fasteners and sealant | $0.20 | $0.60 | $1.50 | Per sq ft |
| Delivery fee (job-site) | $0.00 | $12.50 | $60.00 | Depends on distance |
Major Quote Components for 1 1/8 Inch Plywood
Breakdown helps compare bids. The following table shows typical cost components and how they contribute to the total. Assumptions: single-project quote, standard material, no special coatings.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (1 1/8″ plywood sheets) | $28.00 | $39.00 | $62.00 | Per sheet |
| Labor for cutting and fitting | $1.50 | $2.40 | $3.00 | Per sq ft |
| Delivery/transport | $0.00 | $25.00 | $60.00 | Flat or tiered |
| Waste and trimming allowance | $2.00 | $4.50 | $9.00 | Estimated scrap |
| Tax | $0.00 | $2.50 | $6.50 | State/local |
Variables That Most Change a 1 1/8 Inch Plywood Quote
Quantity, species, and finish level top the list of price-shaping factors. Two numeric thresholds frequently shift bids: sheet count and grade. A single project moving from 4 sheets to 10 sheets can unlock volume discounts; rising from utility face to premium face can more than double per-sheet cost. Assumptions: mid-range project scope with typical access and stacking space.
- Sheet count threshold: 4 sheets to 10+ sheets commonly yields a meaningful price break.
- Face grade threshold: average grade to premium grade often expands price by 20%–40% per sheet.
- Delivery distance: within 20 miles is often base rate; beyond 40–60 miles adds surcharges.
Strategies to Reduce the 1 1/8 Inch Plywood Price
Smart choices can trim overall cost without compromising project integrity. Consider scope control, material mix, and timing. Delaying nonessential purchases until regional price dips and batching orders with other projects reduces overhead. Assumptions: supply availability and no rush processing.
| Action | Expected Effect | Practical Notes | Example |
|---|---|---|---|
| Choose utility-grade faces | Lower per-sheet price | Accept minor surface imperfections | $28-$40 per sheet |
| Order in bulk | Discounts up to ~20% | Plan storage for excess | Save $5-$15 per sheet |
| Bundle with other hardware | Reduced delivery fees | Coordinate with lumber/fasteners | $0-$40 delivery |
| Opt for common stock colors and finishes | Avoid premium coatings | Maintain structural use only | Lower end of range |
